Select your van:

Select your wheelbase:

Surface pattern:

✓
Custom CAD-cut for: Ram ProMaster 159" WB · 2014 - 2026+

Pre-cut for exact wheel well positions, floor rib channels, and cargo tie-down slots. Designed as a drop-in floor with no trimming required on a bare factory cargo floor.

159" WB Deck Plate 4mm Rubber
Not sure of your wheelbase?

Check the sticker on your driver’s door jamb — it lists the wheelbase.

Confirm your exact vehicle before ordering. Minor trimming may be needed around partitions, shelving, wall panels, tie-downs, or aftermarket upfits.

Product Information

Product Details

VANDECK™ Custom Fit Floor for RAM ProMaster — 159" wheelbase

If you need dependable, no-nonsense protection for your cargo van, VANDECK™ delivers. Made from 100% post-industrial recycled rubber, this heavy-duty 4mm one-piece floor is built for trades professionals who want durability, traction, and fast installation — without the cost or complexity of rigid flooring systems.

The RAM ProMaster has the lowest load floor and widest cargo area in its class. This VANDECK™ floor is CAD-cut for the ProMaster cargo area and wheel wells, giving the flat floor a grippy, protective surface that stays put.

Fitment

  • Vehicle: RAM ProMaster
  • Model years: 2014+
  • Wheelbase: 159" wheelbase
  • Surface pattern: Deck Plate — Low-profile plate pattern that is easy to sweep and slide cargo across.
  • Thickness: 4mm
  • Size: 74" × 144"
  • Weight: 52 LB

Check the wheelbase on your driver-door label before ordering. Minor trimming may be needed around partitions, shelving, or aftermarket upfits.

Why Choose VANDECK™

  • One-piece, drop-in design. No seams and no shifting panels — lay it in and get back to work.
  • High-traction surface. Improves footing and helps keep cargo from sliding on bare steel.
  • Moisture and chemical resistant. Handles water, oil, and jobsite spills.
  • Low odor. Quality recycled rubber with minimal rubber smell.
  • Easy maintenance. Sweep it, wipe it, or hose it off.

A Smarter Upgrade from Bare Steel

VANDECK™ hits the sweet spot between performance, simplicity, and cost. It protects your factory floor from scratches, dents, and daily wear without locking you into a permanent upfit. Install it in your ProMaster and turn your cargo area into a safer, more controlled workspace.

Install Guide

Install Your VANDECK™ Floor

Difficulty DIY friendly
Time About 30 minutes
Adhesive Not needed
Fit CAD-cut, drop-in
1
Step 1

Clear and sweep the floor

Remove cargo, sweep out debris, and make sure the factory floor is dry.

Pro tip Install at room temperature for the easiest fit.
2
Step 2

Let the floor relax

Unroll the floor in the cargo area and let it lie flat for a few hours so the roll memory relaxes.

3
Step 3

Drop it in

Start at the bulkhead and line up the wheel-well and door cutouts. No adhesive is needed.

4
Step 4

Trim if needed

Trim around partitions, shelving, or aftermarket upfits with a sharp utility knife and a straightedge.